Publications

The complete peer-reviewed record — journal articles, thesis and dissertation, refereed book chapters, patents, refereed conference papers, and technical reports. Citation metrics live on Google Scholar and ORCID.

Peer-Reviewed Journal Publications

Asterick by my name denote that I am the corresponding author (leading research) when not in first author position.

106 entries · newest first
  1. Messina, J., Luo, R., Xu, K., Lu, G., Deng, H., Tschopp, M.A., Gao, F., “Machine learning to predict aluminum segregation to magnesium grain boundaries,” Scripta Materialia, 204 (2021) 114150.
  2. Paudel, Y., Giri, D., Priddy, M.W., Barrett, C.D., Inal, K., Tschopp, M.A., Rhee, H., El Kadiri, H., “A Review on Capturing Twin Nucleation in Crystal Plasticity for Hexagonal Metals,” Metals, 11(9) (2021) 1373:1-53.
  3. Dyar, C., Brauer, S., Williams, W., Doude, H., Whittington, W., Oppedal, A., El Kadiri, H., Tschopp, M.A., Rhee, H., “Enhancing Mechanical Properties of Hot Wrought Steel by Microalloying and Optimizing Heat Treatments,” Journal of Materials Engineering and Performance, 29(8) (2020) 5374–5387.
  4. Chavoshi, S.Z., Tschopp, M.A., Branicio, P.S., “Transition of deformation mechanisms in nanotwinned single crystalline SiC,” Philosophical Magazine 99(21) (2019) 2636–2660.
  5. Khanzadeh, M., Chowdhury, S., Tschopp, M.A., Doude, H., Marufuzzaman, M., Bian, L., “In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes,” Institute of Industrial and Systems Engineers (IISE) Transactions, 51(5) (2019) 437–455.“Enabling `lab-to-fab' transition of metal-based additive manufacturing” was highlighted by IISE Transactions
  6. Aboutaleb, A.M., Mahtabi, M.J., Tschopp, M.A., Bian, L., “Multi-objective accelerated process optimization of mechanical properties in laser-based additive manufacturing: Case study on Selective Laser Melting (SLM) Ti-6Al-4V,” Journal of Manufacturing Processes, 38 (2019) 432–444.
  7. Seifi, S.H., Tian, W., Doude, H., Tschopp, M.A., Bian, L., “Layer-wise modeling and anomaly detection for laser-based additive manufacturing,” Journal of Manufacturing Science and Engineering, 141(8) (2019) 081013:1–12.
  8. Jordan, L.A., Tschopp, M.A., Mlsna, T.E., Wipf, D., Horstemeyer, M.F., “Modeling and experimental calibration of the corrosion of RHA steel in immersion and salt-fog environments,” Corrosion Engineering, Science and Technology, 54(2) (2019) 114–121.
  9. Hernández-Rivera, E., Chowdhury, S., Coleman, S.P., Ghassemi, P., Tschopp, M.A.*, “Integrating Exploratory Data Analytics into ReaxFF Parameterization,” MRS Communications, 8(3) (2018) 1300–1310.
  10. Goins, P.E., Murdoch, H.A., Hernández-Rivera, E., Tschopp, M.A., “Effect of magnetic fields on microstructure evolution,” Computational Materials Science, 150 (2018) 464–474.
  11. Khanzadeh, M., Chowdhury, S., Marufuzzaman, M., Tschopp, M.A., Bian, L.,“Porosity Prediction: Supervised-learning of Thermal History for Direct Laser Deposition,” Journal of Manufacturing Systems, 47 (2018) 69–82.
  12. Chen, J., Tschopp, M.A., Dongare, A.M., “Shock Wave Propagation and Spall failure of Nanocrystalline Cu/Ta Alloys: Effect of Ta in Solid-Solution,” Journal of Applied Physics, 122(22) (2017) 225901.
  13. Khanzadeh, M., Chowdhury, S., Tschopp, M.A., Bian, L.,“Quantifying Geometric Accuracy with Unsupervised Machine Learning: Using Self-Organizing Maps on Fused Filament Fabrication Additive Manufacturing Parts,” (ASME) Journal of Manufacturing Science and Engineering, 140 (2018) 031011.
  14. Chen, J., Tschopp, M.A., Dongare, A.M., “Role of Nanoscale Cu/Ta Interfaces on the Shock Compression and Spall Failure of Nanocrystalline Cu/Ta Systems at the Atomic Scale,” Journal of Materials Science, 53 (2018) 5745–5765.
  15. Imandoust, A., Barrett, C.D., Al-Samman, T., Tschopp, M.A., Essadiqi, E., El Kadiri, H., Hort, N., “Unraveling recrystallization mechanisms governing texture development from rare earth element additions to magnesium,” Metallurgical Transactions A, 49(5) (2018) 1809–1829.
  16. Atwater, M.A., Guevara, L.N., Darling, K.A., Tschopp, M.A., “Solid State Porous Metal Production: A Review of the Capabilities, Characteristics and Challenges,” Advanced Engineering Materials, 20(7) (2018) 1700766:1–33.Cover ImageBest of Advanced Engineering Materials 2018 contains articles selected by the editors to represent the most outstanding articles published throughout the past year.
  17. Foley, D., Tucker, G.J., Tschopp, M.A., Coleman, S.P., “Correlating deformation mechanisms with X-ray diffraction phenomena in nanocrystalline metals using atomistic simulations,” Computational Materials Science, 154 (2018) 178–186.
  18. Turnage, S., Darling, K.A., Rajagopalan, M., Whittington, W., Tschopp, M.A., Peralta, P., Solanki, K.N., “Influence of variable processing conditions on the quasi-static and dynamic behaviors of resistance spot welded aluminum 6061-T6 sheets,” Material Science and Engineering A, 724 (2018) 509–517.
  19. Khanzadeh, M., Tian, W., Yadollahi, A., Doude, H.R., Tschopp, M.A., Bian, L., “Dual Process Monitoring of Metal-Based Additive Manufacturing Using Tensor Decomposition of Thermal Image Streams,” Additive Manufacturing, 23 (2018) 443–456.
  20. Banadaki, A., Tschopp, M.A., Patala, S., “An Efficient Monte-Carlo Algorithm for Determining the Minimum Energy Structures of Metallic Grain Boundaries,” Computational Materials Science, 155 (2018) 466–475.
  21. Tschopp, M.A., Gao, F., Solanki, K., “He–V cluster nucleation and growth in α-Fe Grain Boundaries,” Acta Materialia, 124 (2017) 544–555.
  22. Tschopp, M.A., Hernandez, E., Darling, K.A., Atwater, M.A., Solanki, K.N., “A Thermodynamic and Kinetic-Based Grain Growth Model for Nanocrystalline Materials: Parameter Sensitivity Analysis and Model Extension,” Computational Materials Science, 131 (2017) 250–265.
  23. Tschopp, M.A., Nouranian, S., Rinderspacher, C., Gwaltney, S.R., Baskes, M.I., Horstemeyer, M.F., “Quantifying Parameter Sensitivity and Uncertainty of a Reactive Interatomic Potential for Saturated Hydrocarbons,” ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, 4(1) (2018) 011004:1–17.Invited article by Sandia National Laboratory colleague in Uncertainty Quantification (DAKOTA developer)
  24. Hernandez, E., Coleman, S.P., Tschopp, M.A., “Using Similarity Metrics to Quantify Differences in High-Throughput Datasets: Application to X-Ray Diffraction Patterns,” ACS Combinatorial Science, 19 (2017) 25–36.Published an ARL-TN on applying similarity/distance metrics in MATLAB and Python
  25. Hornbuckle, B.C., Murdoch, H.A., Roberts, A.J., Kecskes, L.J., Tschopp, M.A., Doherty, K.J., Yu, J.H., “Property Mapping of Friction Stir Welded Al-2139 T8 Plate using Site Specific Shear Punch Testing,” MSE A, 682 (2017) 192–201.
  26. Barrett, C.D., Imandoust, A., Oppedal, A.L., Inal, K., Tschopp, M.A., El Kadiri, H., “Effect of Grain Boundaries on Texture Formation during Dynamic Recrystallization of Magnesium Alloys,” Acta Materialia, 128 (2017) 270–283.
  27. Paudel, Y., Barrett, C.D., Tschopp, M.A., Inal, K., El Kadiri, H., “Beyond initial twin nucleation in hcp metals: Micromechanical formulation for determining twin spacing during deformation,” Acta Materialia, 133 (2017) 134–146.
  28. Rajagopalan, M., Adlakha, I., Tschopp, M.A., Solanki, K.N., “Energetics of hydrogen segregation to Fe grain boundaries for modeling stress corrosion cracking,” JOM (Journal of Materials), 69 (2017) 1398–1403.
  29. Aboutaleb, A.M., Tschopp, M.A., Rao, P.K., Bian, L., “Multi-Objective Accelerated Process Optimization of Part Geometric Accuracy in Additive Manufacturing,” ASME Journal of Manufacturing Science and Engineering, Special Issue on Data Science-Enhanced Manufacturing, 139(10) (2017) 101001–1.
  30. Tschopp, M.A., Coleman, S.P., McDowell, D.L., “Symmetric and Asymmetric Grain Boundary Structure and Energy in Copper and Aluminum (and transferability to other FCC metals),” Integrating Materials and Manufacturing Innovation, 4(1) (2015) 176–189.First Data Descriptor article in IMMICo-published with largest public grain boundary dataset for FCC metals (available on NIST data repository)Highlighted by Journal Editor C.H. Ward in article “Introducing the Data descriptor article,” IMMI 4 (2015) 190–191 as “an excellent example of a rich and high-quality dataset that many others in the field will find useful in the conduct of their own research.”Incorporated into new NIST Materials Data Curation System as the example for grain boundaries
  31. Darling, K.A., Kapoor, M., Kotan, H., Thompson, G.B., Tschopp, M.A., Kecskes, L.J., “Mechanical Properties of Oxide-Dispersion-Strengthened (ODS) Ferritic Alloys Based on Zirconium Oxides,” Journal of Nuclear Materials, 467 (2015) 205–213.
  32. Coleman, S.P., Hernandez-Rivera, E., Behler, K.D., Synowczynski-Dunn, J., Tschopp, M.A.*, “Challenges of Engineering Grain Boundaries in Boron-Based Armor Ceramics,” JOM (Journal of Materials), 68 (2016) 1605–1615.Invited article for issue on grain boundaries and interfaces
  33. Atwater, M.A., Darling, K.A., Tschopp, M.A.*, “Synthesis, characterization and quantitative analysis of porous metal microstructures: Application to microporous copper produced by solid state foaming,” AIMS Materials Science, 3(2) (2016) 573-590.Invited article for special issue on advanced mirostructural characterization of materials
  34. Bhatia, M.A., Rajagopalan, M., Darling, K.A., Tschopp, M.A., Solanki, K.N., “The role of Ta on twinnability in nanocrystalline Cu-Ta alloys,” Materials Research Letters, 5 (2017) 48–54.
  35. Nouranian, S., Gwaltney, S.R., Baskes, M.I., Tschopp, M.A., Horstemeyer, M.F., “Nanomechanical Simulations of Tensile Bond Rupture in Single Alkane Molecules with Generalization to a Single Polyethylene Chain Using the Modified Embedded-Atom Method,” Chemical Physics Letters, 635 (2015) 278–284.
  36. Rojhirunsakoola, T., Darling, K.A., Tschopp, M.A., Pun, G.P.P., Mishin, Y., Banerjee, R., Kecskes, L.J., “Structure and Thermal Decomposition of a Nanocrystalline Mechanically Alloyed Supersaturated Cu-Ta Solid Solution,” MRS Communications, 5 (2015) 333–339.
  37. Tschopp, M.A., Cormier, J., Feng, Q., Evans, J.L., “Multiscale Microstructure, Mechanics and Prognosis of High Temperature Alloys,” Metallurgical Transactions A, 46 (2015) 4587–4588.
  38. Darling, K.A., Tschopp, M.A.*, Liu, Z.K., “Rebuttal Comments on “Mitigating grain growth in binary nanocrystalline alloys through solute selection based on thermodynamic stability maps”,” Computational Materials Science, 107 (2015) 238–242.
  39. Coleman, S.P., Tschopp, M.A., Weinberger, C.R., Spearot, D.E., “Bridging atomistic simulations and experiments via virtual diffraction: Understanding homophase grain boundary and heterophase interface structures,” Journal of Materials Science, 51 (2016) 1251–1260.
  40. Tschopp, M.A., Miller, J., Oppedal, A., Solanki, K.N., “Evaluating local primary dendrite arm spacing characterization techniques using synthetic directionally-solidified dendritic microstructures,” Metallurgical Transactions A, 46 (2015) 4610–4628.
  41. Atwater, M.A., Darling, K.A., Tschopp, M.A., “Solid-state foaming by oxide reduction and expansion: Tailoring the foamed metal microstructure in the Cu–CuO system with oxide content and annealing conditions,” Advanced Engineering Materials, 18(1) (2016) 83–95.
  42. Adlakha, I., Solanki, K.N., Tschopp, M.A., “The role of grain boundary structure and crystal orientation on crack growth asymmetry in aluminum,” Materials Science and Engineering A, 618 (2014) 345-354.
  43. Adlakha, I., Bhatia, M.A., Tschopp, M.A., Solanki, K.N., “Atomic scale investigation of grain boundary structure role on intergranular deformation in aluminium,” Philosophical Magazine, 94 (2014) 3445–3466.
  44. van Beers, P.R.M., Kouznetsova, V.G., Geers, M.G.D., Tschopp, M.A., McDowell, D.L., “A multi-scale model of grain boundary structure and energy: From atomistic to continuum description,” Acta Materialia, 82 (2015) 513–529.“Furthermore, I would like to direct acknowledgements to Mark Tschopp and David McDowell for their constructive help, insight and contributions to the third chapter," in “Multiscale modelling of grain boundary plasticity" by Paul van Beers, dissertation, Technische Universiteit Eindhoven (2015).
  45. Tschopp, M.A., Gao, F., Solanki, K.N., “Binding of HenV Clusters to α-Fe Grain Boundaries,” Journal of Applied Physics, 115 (2014) 233501.
  46. Darling, K.A., Tschopp, M.A.*, Guduru, R.K., Yin, W.H., Wei, Q., Kecskes, L.J., “Microstructure and Mechanical Properties of Bulk Nanostructured Cu-Ta Alloys Consolidated by Equal Channel Angular Extrusion,” Acta Materialia, 76 (2014) 168–185.
  47. Tschopp, M.A., Murdoch, H.A., Kecskes, L.J., Darling, K.A., ““Bulk” Nanocrystalline Metals: Review of the Current State of the Art and Future Opportunities for Copper and Copper Alloys,” JOM (Journal of Materials), 66 (2014) 1000–1019.
  48. Shang, S.L., Wang, Y., Du, Y., Tschopp, M.A., Liu, Z.K., “Integrating computational modeling and first-principles calculations to predict the stacking fault energy for dilute multicomponent Ni-base alloys,” Computational Materials Science, 91 (2014) 50–55.
  49. Rajagopalan, M., Bhatia, M.A., Solanki, K.N., Tschopp, M.A., Srolovitz, D., “Role of atomistic-scale energetics on liquid-metal embrittlement of aluminum due to gallium,” Acta Materialia, 73 (2014) 312–325.
  50. Liyanage, L., Houze, J., Kim, S., Tschopp, M.A., Kim, S-G., Baskes, M.I., Horstemeyer, M.F., “Structural, elastic and thermal properties of cementite (Fe3C) calculated using Modified Embedded Atom Method,” Physical Review B, 89 (2014) 094102.Fe–C Potential published, NIST potential site
  51. Nouranian, S., Tschopp, M.A., Gwaltney, S.R., Baskes, M.I., Horstemeyer, M.F., “A Reactive Interatomic Potential for the Molecular Dynamics Simulations of Saturated Hydrocarbons Using the Modified Embedded-Atom Method,” Physical Chemistry Chemical Physics, 16 (2014) 6233–6249.
  52. Asadi, E., Zaeem, M.A., Moitra, A., Tschopp, M.A.*, “Effects of Vacancy Defects on Generalized Stacking Fault Energy of FCC metals,” Journal of Physics: Condensed Matter, 26 (2014) 115404.IOP Select Article
  53. Zimmerman, J., Sabau, A., Zaeem, M.A., Tschopp, M., Spearot, D., “Algorithm Development in Computational Materials,” Journal of Materials, 66 (2014) 397–398.
  54. Tschopp, M.A., Gao, F., Yang, L., Solanki, K.N., “Binding Energetics of Substitutional and Interstitial Helium and Di-Helium Defects with Grain Boundary Structure in α-Fe,” Journal of Applied Physics, 115 (2014) 033503:1–16.
  55. Atwater, M.A., Darling, K.A., Tschopp, M.A.*, “Towards reaching the theoretical limit of porosity in conventional solid state metal foams: Intraparticle expansion as a primary and additive means to create porosity,” Advanced Engineering Materials, 16 (2014) 190–195.Cover Image“AERO: a new method for creating metal foams,” Materials Views, January 30, 2014.“Using Nanotechnology to Create Metal Foams,” Millersville University press release, February 20, 2014.Sectioned Particle Video.
  56. Darling, K.A., Tschopp, M.A.*, Atwater, M.A., VanLeeuwen, B.K., Liu, Z.K., “Mitigating grain growth in binary nanocrystalline alloys through solute selection based on thermodynamic stability maps,” Computational Materials Science, 84 (2014) 255–266.
  57. Eshraghi, M., Tschopp, M.A., Zaaem, M.A., Felicelli, S.D., “Effect of resistance spot welding parameters on weld pool properties in a DP600 dual-phase steel: A parametric study using thermomechanically-coupled finite element analysis,” Materials and Design, 56 (2014) 387–397.
  58. Darling, K.A., Tschopp, M.A., Roberts, A.J., Armstrong, L., Kapoor, D., Mathaudhu, S.N., Kecskes, L., “Influence of Mn Solute Content on Grain Size Reduction and Improved Strength in Mechanically Alloyed Al-Mn Alloys,” Materials Science and Engineering A, 589 (2014) 57–65.
  59. Tschopp, M.A., Miller, J.D., Oppedal, A.L., Solanki, K.N., “Characterizing the local primary dendrite arm spacing in directionally-solidified dendritic microstructures,” Metallurgical Transactions A 45(1) (2014) 426–437.Editor's Choice Article“CAVS Studies High Temperature Aerospace Materials in Modern Turbine Engines,” MSU CAVS press release, December 6, 2013.Nominated for Howe Medal Award in ASM International
  60. Rajagopalan, M., Tschopp, M.A., Solanki, K.N., “Grain boundary segregation of interstitial and substitutional impurity atoms in alpha-iron,” JOM (Journal of Materials), 66 (2014) 129-138.
  61. El Kadiri, H., Barrett, C.D., Tschopp, M.A., “The candidacy of shuffle and shear during compound twinning in hexagonal close-packed structures,” Acta Materialia 61 (2013) 7646–7659.
  62. Darling, K.A., Tschopp, M.A.*, Roberts, A.J., Ligda, J.P., Kecskes, L.J., “Enhancing the grain refinement in polycrystalline materials using surface mechanical attrition treatment at cryogenic temperatures,” Scripta Materialia, 69 (2013) 461–464.
  63. Deng, X., Potula, S., Grewal, H., Solanki, K.N., Tschopp, M.A., Horstemeyer, M.F., “Finite Element Analysis Head Injury Study: Parametric Effects on the Side curtain airbag deployment interaction with a dummy head in a side impact crash,” Accident Analysis & Prevention 55 (2013) 232-241.
  64. Rhodes, N.R., Tschopp, M.A.*, Solanki, K.N., “Quantifying the Energetics of Carbon Segregation to Fe Symmetric Tilt Grain Boundaries Using Atomistic Simulations,” Modeling and Simulation in Materials Science and Engineering, 21(3) (2013) 035009.Cover image.
  65. Zhang, X., Tschopp, M.A., Horstemeyer, M.F., Shi, S.Q., Cao, J., “Mechanical properties of amorphous cellulose using molecular dynamics simulations with a reactive force field,” International Journal of Modelling, Identification and Control, 18(3) (2013) 211–217.
  66. Bouvard, J.L., Francis, D.K., Tschopp, M.A., Marin, E.B., Bammann, D.J., Horstemeyer, M.F., “An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation,” International Journal of Plasticity, 42 (2013) 168–193.
  67. Solanki, K.N., Tschopp, M.A., Bhattia, M.A., Rhodes, N.R., “Nanoscale Investigation of Role of Grain Boundary Character on Hydrogen Segregation and Embrittlement in α-Fe,” Metallurgical and Materials Transactions A, 44 (2013) 1365–1375.
  68. Bhattia, M.A., Solanki, K.N., Moitra, A., Tschopp, M.A.*, “Investigating damage evolution at the nanoscale: Molecular dynamics simulations of nanovoid growth in single crystal aluminum,” Metallurgical and Materials Transactions A, 44 (2013) 617–626.
  69. Barrett, C.D., Tschopp, M.A.*, El Kadiri, H., “Breakdown of the Schmid Law in Homogeneous and Heterogeneous Nucleation Events of Slip and Twinning in Magnesium,” Journal of the Mechanics and Physics of Solids, 60 (2012) 2084–2099.
  70. Potula, S., Solanki, K.N., Oglesby, D.L., Tschopp, M.A., Bhattia, M.A., “Investigating occupant injuries and safety through simulating the interaction between side curtain airbag deployment and an out-of-position occupant,” Accident Analysis and Prevention, 49 (2012) 392–403.
  71. Tschopp, M.A., Solanki, K.N., Baskes, M.I., Gao, F., Sun, X., Khaleel, M., Horstemeyer, M.F., “Generalized framework for interatomic potential design: Application to the Fe-He system,” Journal of Nuclear Materials, 425 (2012) 22–32.
  72. Barrett, C.D., Tschopp, M.A.*, El Kadiri, H., “Automated analysis of twins in hexagonal close-packed metals using molecular dynamics,” Scripta Materialia, 66 (2012) 666–669.`compute basal/atom' implemented into LAMMPS
  73. Tschopp, M.A., Solanki, K.N., Gao, F., Sun, X., Khaleel, M., Horstemeyer, M.F., “Probing grain boundary sink strength at the nanoscale: Energetics and length scales of vacancy and interstitial absorption by grain boundaries in α-Fe,” Physical Review B, 85 (2012) 064108.“CAVS studies radiation effects on nuclear reactor materials,” MSU press release, March 09, 2012.
  74. Li, D.S., Tschopp, M.A.*, Khaleel, M., Sun, X., “Comparison of reconstructed spatial microstructure images using different statistical descriptors,” Computational Materials Science, 51 (2012) 437–444.PNNL Research Highlight, FEB 2012, “Learning About Material Integrity from Statistical Data: Imaging, statistics, and computational analysis shed new light on defects”.
  75. Zhang, X.E., Tschopp, M.A., Shi, S.Q., Cao, J., “Molecular Dynamics Simulations of the Glass Transition Temperature of Amorphous Cellulose,” Applied Mechanics and Materials, 214 (2012) 7–11, DOI:10.4028/www.scientific.net/AMM.214.7.
  76. Lugo, M., Jordan, J.B., Horstemeyer, M.F., Tschopp, M.A., Harris, J., Gokhale, A., “Quantification of Damage Evolution in a 7075 Aluminum Alloy using an Acoustic Emission Technique,” Materials Science and Engineering A, 528 (2011) 6708–6714.
  77. Lugo, M., Tschopp, M.A., Jordan, J.B., Horstemeyer, M.F., “Microstructure and Damage Evolution during Tensile Loading of AZ61 Magnesium Alloy,” Scripta Materialia, 64 (2011) 912–915.
  78. Tschopp, M.A., Horstemeyer, M.F., Gao, F., Sun, X., Khaleel, M., “Energetic driving force for preferential binding of self-interstitial atoms to Fe grain boundaries over vacancies,” Scripta Materialia, 64 (2011) 908–911.
  79. Tschopp, M.A., Wilks, G.B., Spowart, J.E., “Multiscale Characterization of Chemically Reactive Multiphase Composite Microstructures,” Journal of Engineering Materials and Technology (special issue on Recent Advances on Composites and Heterogeneous Materials), 133 (2011) 011004.
  80. Hossain, D., Tschopp, M.A.*, Ward, D.K., Bouvard, J.L., Wang, P., Horstemeyer, M.F., “Molecular dynamics simulations of deformation mechanisms of amorphous polyethylene,” Polymer, 51 (2010) 6071–6083.
  81. Tschopp, M.A., Groeber, M.A., Simmons, J., Rosenberger, A.H., Woodward, C., “Automated Extraction of Symmetric Microstructure Features in Serial Sectioning Images,” Materials Characterization, 61 (2010) 1406–1417.
  82. Tschopp, M.A., Tiley, J.S., Viswanathan, G.B., “Automated Identification and Characterization of Secondary & Tertiary γprime Precipitates in Nickel-based Superalloys,” Materials Science & Technology, 26(12) (2010) 1414–1422.
  83. Tucker, G.J., Tschopp, M.A., McDowell, D.L., “Evolution of Structure and Free Volume in Symmetric Tilt Boundaries during Deformation using Atomistic Simulations,” Acta Materialia, 58 (2010) 6464–6473.
  84. Wilks, G.B., Tschopp, M.A., Spowart, J.E., “Multi-Scale Characterization of Inhomogeneous Morphologically Textured Microstructures,” Materials Science & Engineering A, 527 (2010) 883–889.
  85. Tschopp, M.A., Groeber, M.A., Fahringer, R., Simmons, J., Rosenberger, A.H., Woodward, C., “Symmetry-Based Automated Extraction of Microstructural Features: Application to Dendritic Cores in Single Crystal Ni-Based Superalloys,” Scripta Materialia, 62 (2010) 357–360.
  86. Tschopp, M.A., Groeber, M.A., Fahringer, R., Simmons, J., Rosenberger, A.H., Woodward, C., “Automated Detection and 3D Characterization of Microstructural Features: Application to Eutectic Particles in Single Crystal Ni-Based Superalloys,” Modelling and Simulation in Materials Science & Engineering, 18 (2010) 025014.MSMSE Featured Article
  87. Tiley, J.S., Rajagopolan, S., Viswanathan, G.B., Shiveley, A., Tschopp, M.A., Banerjee, R., Fraser, H.L., “Measurement of γprime Precipitates in a Nickel-based Superalloy using Energy-Filtered Transmission Electron Microscopy coupled with Automated Segmenting Techniques,” Micron, 41(6) (2010) 641–647.
  88. Tschopp, M.A., Bartha, B.B., Porter, W.J., Murray, T., Fairchild, S., “Microstructure - dependent local strain behavior in polycrystals through in situ scanning electron microscope tensile experiments,” Metallurgical Transactions A, 40 (2009) 2363–2368.
  89. Spearot, D.E., Tschopp, M.A., McDowell, D.L., “Orientation and Rate Dependence of Dislocation Nucleation Stresses computed using Molecular Dynamics,” Scripta Materialia, 60 (2009) 675–678.
  90. Tschopp, M.A., McDowell, D.L., “Dislocation nucleation in Σ3 asymmetric tilt grain boundaries,” International Journal of Plasticity, 24 (2008) 191–217.
  91. Tschopp, M.A., McDowell, D.L., “Grain boundary dislocation sources in nanocrystalline copper,” Scripta Materialia, 58 (2008) 299–302.
  92. Tschopp, M.A., McDowell, D.L., “Influence of single crystal orientation on homogeneous dislocation nucleation under uniaxial loading,” Journal of Mechanics and Physics of Solids, 56 (2008) 1806–1830.
  93. Tschopp, M.A., Tucker, G.J., McDowell, D.L., “Atomistic simulations of tension-compression asymmetry in dislocation nucleation for copper grain boundaries,” Computational Materials Science, 44 (2008) 351–362.
  94. Tschopp, M.A., Wilks, G.B., Spowart, J.E., “Multi-Scale Characterization of Orthotropic Microstructures,” Modelling and Simulation in Materials Science and Engineering, 16 (2008) 065009.
  95. Spearot, D.E., Tschopp, M.A., Jacob, K.I., McDowell, D.L., “Tensile strength of ⟨100⟩ and ⟨110⟩ tilt bicrystal copper interfaces,” Acta Materialia, 55 (2007) 705–714.
  96. Tschopp, M.A., McDowell, D.L., “Tension-compression asymmetry in homogeneous dislocation nucleation in single crystal copper,” Applied Physics Letters, 90 (2007) 121916.
  97. Tschopp, M.A., Tucker, G.J., McDowell, D.L., “Structure and free volume of ⟨110⟩ symmetric tilt grain boundaries with the E structural unit,” Acta Materialia, 55 (2007) 3959–3969.
  98. Tschopp, M.A., McDowell, D.L., “Structures and energies of Σ3 asymmetric tilt grain boundaries in Cu and Al,” Philosophical Magazine, 87 (2007) 3147–3173.
  99. Tschopp, M.A., McDowell, D.L., “Structural unit and faceting description of Σ3 asymmetric tilt grain boundaries,” Journal of Materials Science, 42(18) (2007) 7806–7811.
  100. Tschopp, M.A., McDowell, D.L., “Asymmetric tilt grain boundary structure and energy in copper and aluminum,” Philosophical Magazine, 87(25) (2007) 3871–3892.
  101. Tschopp, M.A., Spearot, D.E., McDowell, D.L., “Atomistic simulations of homogeneous dislocation nucleation in single crystal copper,” Modelling and Simulation in Materials Science and Engineering, 15 (2007) 693–709.
  102. Tschopp, M.A., Wang, Q.G., DeWyse, M.J., “Mechanisms of Misrun Formation in Aluminum Lost Foam Castings,” Transactions of the American Foundry Society, 110 (2002) 1371–1386.
  103. Tschopp, M.A., “Fluidity of Aluminum A356 in the Lost Foam Casting Process,” Transactions of the American Foundry Society, 110 (2002) 1387–1397.
  104. Bennett, S., Tschopp, M.A., Vrieze, A., Zelkovich, E., Ramsay, C.W., Askeland, D.R., “Observations on the Effect of Gating Design on Metal Flow and Defect Formation in Aluminum Lost Foam Castings: Part I,” Transactions of the American Foundry Society, 109 (2001) 1473–1487.
  105. Tschopp, M.A., Ramsay, C.W., Askeland, D.R., “Mechanisms of Formation of Pyrolysis Defects in Aluminum Lost Foam Castings,” Transactions of the American Foundry Society, 108 (2000) 609–614.Best Paper Award
  106. Tschopp, M.A., Ramsay, C.W., Askeland, D.R., “Processing Variable Significance on Metal Flow and Defect Formation in Thick Section LFCs - Full Factorial Experiment,” Transactions of the American Foundry Society, 108 (2000) 267–274.

Thesis and Dissertation

2 entries · newest first
  1. Tschopp, M.A., “Atomistic simulations of dislocation nucleation in single crystals and grain boundaries,” Ph.D. Dissertation, Georgia Institute of Technology, pp.\ 1–375 (2007) DOI: 1853/16239.2008 Sigma Xi Best PhD Thesis Award
  2. Tschopp, M.A., “Mechanisms of the Formation of Pyrolysis Defects in Aluminum Lost Foam Castings,” M.S. Thesis, University of Missouri-Rolla, pp.\ 1–255 (1999). enumi_saved

Refereed Book Chapters

2 entries · newest first
  1. Tschopp, M.A., Solanki, K.N., Horstemeyer, M.F., “A Generalized Framework for Quantifying Material Structure-Property Relationships and Uncertainties: Applicability to ICME,” http://www.asminternational.org/portal/site/www/AsmStore/ProductDetails/?vgnextoid=98e8444762db0310VgnVCM100000621e010aRCRD#detailsTools Developed and Needed to Realize the Vision of Integrated Computational Materials Engineering, ed. S. Arnold & T. Wong, ASM International, 2011.
  2. Tschopp, M.A., Spearot, D.E., McDowell, D.L., “Influence of Grain Boundary Structure on Dislocation Nucleation in FCC Metals,” Dislocations in Solids, A Tribute to F.R.N. Nabarro, ed. J.P. Hirth, vol. 14, pp. 43–139 (2008).

Patents

1 entry · newest first
  1. Atwater, M.A., Darling, K.A., Tschopp, M.A., “Method of creating porous structures by particle expansion,” US Patent App. 16/241,345.

Refereed Conference Papers

33 entries · newest first
  1. Seifi, S.H., Tian, W., Doude, H., Tschopp, M.A., Bian, L., “Layer-wise Profile Monitoring of Laser-based Additive Manufacturing,” SFF 2018.
  2. Khanzadeh, M., Chowdhury, S., Tschopp, M.A., Bian, L., “Predicting Porosity in Additive Manufacturing Using Image Processing of Melt Pool Profiles,” Proceedings of the 12th Manufacturing Science and Engineering Conference, MSEC 2017.
  3. Aboutaleb, A.M., Bian, L., Rao, P.K., Tschopp, M.A., “Accelerated Geometry Accuracy Optimization of Additive Manufacturing,” Proceedings of the 12th Manufacturing Science and Engineering Conference, MSEC 2017.
  4. Khanzadeh, M., Chowdhury, S., Tschopp, M.A., Bian, L., “Using Melt Pool Thermal Profiles to Predict Porosity in Additive Manufacturing,” 2017 Industrial and Systems Engineering Research Conference (ISERC).2017 ISERC Best Student Paper Award.
  5. Dunn, J.S., Coleman, S.P., Tschopp, M.A., “First Principles Study of Defect Formation in Bulk B6O,” Developments in Strategic Ceramic Materials II: Ceramic Engineering and Science Proceedings, Volume 37(7), John Wiley & Sons, 2017, 181–188.
  6. Atwater, M.A., Darling, K.A., Tschopp, M.A., “Solid State Foaming of Metals via Powder Metallurgy and Additive Expansion through the Reduction of Oxides,” Powder Metallurgy Conference Paper, 2016.
  7. Tschopp, M.A., Darling, K.A., “Integrated Computational Materials Engineering (ICME) of Nanostructured Metal Feed Stocks for Powder Metallurgy,” Powder Metallurgy Conference Paper, 2016.
  8. Darling, K.A., Roberts, A.J., Catalano, J.E., Tschopp, M.A., Kecskes, L.J., “Effect of Processing Parameters on the Microstructure of Mechanically Alloyed Nanostructured Al–Mn Alloys,” 2015 TMS Proceedings:Advanced Composites for Aerospace, Marine, and Land Applications II, 1–11.
  9. Rajagopalan, M., Bhatia, M., Solanki, K., Tschopp, M., “Investigation of atomic-scale energetics on liquid metal embrittlement of aluminum due to gallium,” 2014 TMS Annual Meeting Supplemental Proceedings, Solid-State Interfaces III, p. 1069–1076.
  10. Turnage, S.A., Solanki, K.N., Whittington, W.R., Florea, R.S., Tschopp, M.A., Darling, K.A., “Tensile and shear mechanical properties in a thermo-mechanical-electrical processed spot weld,” 2014 TMS Proceedings, Light Metals 2014, p. 359–363.
  11. Eshraghi, M., Tschopp, M.A., Zaaem, M.A., Felicelli, S.D., “A parametric study of resistance spot welding of a dual-phase steel using finite element analysis,” 8th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-8).
  12. Tschopp, M.A., Oppedal, A.L., Miller, J.D., Groeber, M.A., Rosenberger, A.H., Solanki, K.N., “Characterizing Primary Dendritic Microstructures to Quantify the Processing-Structure-Property Relationship In Single Crystal Nickel-Based Superalloys,” Characterization of Minerals, Metals and Materials 2013, John Wiley & Sons, Inc., p. 301–310 (2013).
  13. Tschopp, M.A., Solanki, K.N., Gao, F., Sun, X., “Energetics and length scales of point defect and element segregation to grain boundaries in α-Fe,” Modeling and Experimental Validation of Multiscale Mechanical Behavior from Atomic Scale to Macro Scale, 2013 TMS Annual Meeting & Exhibition.
  14. Adlakha, I., Solanki, K.N., Tschopp, M.A., “Influence of grain boundary structure on interfacial fracture under tensile loading: Cohesive zone model informed by atomistic simulations,” 2013 TMS Annual Meeting & Exhibition.
  15. Bouvard, J.-L., Bouvard, C., Denton, B., Tschopp, M.A., Horstemeyer, M.F., “Simulation of Impact Tests on Polycarbonate at Different Strain Rates and Temperatures,” Conference Proceedings of the Society for Experimental Mechanics Series, 2011, p. 145–147.
  16. Zhang, X.E., Tschopp, M.A., Shi, S., Cao, J., “Molecular Dynamics Simulations of Deformation in Amorphous Cellulose,” Proceedings of 12th International Conference on Wood & Biofiber Plastic Composites and Nanotechnology in Wood Composites Symposium.
  17. Barrett, C.D., Tschopp, M.A., El Kadiri, H., Li, B., “Influence of Crystallographic Orientation on Twin Nucleation in Single Crystal Magnesium,” in Magnesium Technology 2011 (eds W.H. Sillekens, S.R. Agnew, N.R. Neelameggham and S.N. Mathaudhu), John Wiley & Sons, Inc., Hoboken, NJ, USA.
  18. Lugo, M., Jordan, J.B., Horstemeyer, M.F., Tschopp, M.A., “Microstructure relationship in the damage evolution process of an AZ61 magnesium alloy,” in Magnesium Technology 2011 (eds W.H. Sillekens, S.R. Agnew, N.R. Neelameggham and S.N. Mathaudhu), John Wiley & Sons, Inc., Hoboken, NJ, USA.
  19. Tschopp, M.A., Ward, D.K., Bouvard, J.L., Horstemeyer, M.F., “Atomic Scale Deformation Mechanisms of Amorphous Polyethylene under Tensile Loading,” Massively Parallel Simulations of Materials Response symposium, TMS Annual Meeting 2011, p. 789–794.
  20. Bhattia, M.A., Solanki, K.N., Moitra, A., Tschopp, M.A., “The effect of crystallographic orientation on void growth: A molecular dynamics study,” Deformation, Damage, and Fracture of Light Metals and Alloys symposium, TMS Annual Meeting 2011, p. 577–584.
  21. Tschopp, M.A., Horstemeyer, M.F., “Computational framework for assessing grain boundary structure-property relationships at the nanoscale,” Tools Developed and Needed to Realize the Vision of Integrated Computational Materials Engineering Symposium, Materials Science and Technology Conference and Exhibition 2010, p. 1138–1143.
  22. Tschopp, M.A., Horstemeyer, M.F., Gao, F., Sun, X., Khaleel, M., “Influence of grain boundary character on point defect formation energies in BCC Fe,” Phase Stability, Diffusion, Kinetics and Their Applications (PSDK-V) Symposium, Materials Science and Technology Conference and Exhibition 2010, p. 989–999.
  23. Bhatia, M.A., Tschopp, M.A., Solanki, K., Horstemeyer, M.F., “Influence of crystallographic orientation on void growth in Al,” Multi Scale Modeling of Microstructure Deformation in Material Processing Symposium, Materials Science and Technology Conference and Exhibition 2010, p. 924–933.
  24. Tschopp, M.A., McDowell, D.L., “Atomistic Simulations of Dislocation Nucleation in FCC Metals,” Atomistic Fracture and Deformation, 12th International Conference on Fracture 2009.
  25. Tschopp, M.A., McDowell, D.L., “Atomistic simulations of grain boundary dislocation nucleation,” Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, p. 97–104.
  26. Tschopp, M.A., McDowell, D.L., “Atomistic simulations of grain boundary dislocation nucleation,” Hael Mughrabi Symposium, TMS Annual Meeting 2008, p. 29–34.
  27. Tucker, G.J., Tschopp, M.A., McDowell, D.L., “Atomistic simulations of dislocation nucleation in copper grain boundaries under uniaxial tension and compression,” Hael Mughrabi Symposium, TMS Annual Meeting 2008, p. 141–146.
  28. Tschopp, M.A., Tiwari, S., Ghosh, S., McDowell, D.L., “Influence of Grain Boundary Character on Nanocrystalline Plasticity in Copper,” Hael Mughrabi Symposium, TMS Annual Meeting 2008, p. 215–220.
  29. Tschopp, M.A., McDowell, D.L., “Structures, energies and dislocation nucleation behaviours of Σ3 asymmetric tilt grain boundaries,” Plasticity From the Atomic Scale to Constitutive Laws, TMS Annual Meeting 2007, p. 23–32.
  30. Tschopp, M.A., Tucker, G.J., McDowell, D.L., “Atomistic simulations of free volume in ⟨100⟩ and ⟨110⟩ symmetric tilt grain boundaries in Cu and Al,” Plasticity From the Atomic Scale to Constitutive Laws, TMS Annual Meeting 2007, p. 33–42.
  31. Tschopp, M.A., McDowell, D.L., “Dislocation nucleation in asymmetric tilt grain boundaries,” 2007 International Symposium on Plasticity.
  32. Tschopp, M.A., McDowell, D.L., “Microrotation-Augmented Energy Minimization for Generating Nanocrystalline Materials,” Proceedings of the 16th European Conference of Fracture, Emmanuel Gdoutos (Editor), (2006).
  33. Tschopp, M.A., Tucker, G.J., McDowell, D.L., “Atomistic Modeling of Grain Boundary Structure and Dislocation Emission,” Progress and Challenges in Understanding Materials Interfaces, Lawrence Cook, Wayne Kaplan (Editors), Materials Science and Technology Conference and Exhibition 2006.

Technical Reports

34 entries · newest first
  1. Tschopp, M.A., Cassenti, D.N., “The Army Artificial Intelligence Innovation Institute (Summary Technical Report, 2018–2025),” ARL-TR-10274 (JAN 2026), 1-120.
  2. Tschopp, M.A., Hobbs, R., Work, M., “Artificial Intelligence for Soldiers 2025: Enhancing AI Readiness for the Army,” ARL-SR-0506 (JUN 2025), 1–79.
  3. Tschopp, M.A., “Global Collaboration Dynamics in Scientific Research: Why Does It Occur? Examining the Citation Economy,” ARL-TR-10058 (FEB 2025), 1–56.
  4. Tschopp, M.A., “Global Collaboration Dynamics in Scientific Research: How Often Does It Occur,” ARL-TR-10057 (FEB 2025), 1–72.
  5. Tschopp, M.A., Hobbs, R., “Artificial Intelligence for Soldiers 2024: Experiences and Lessons Learned from the Inaugural Course,” ARL-SR-0497 (JUL 2024), 1–112.
  6. Tschopp, M.A., “From Scientific Institutions to Research Concepts to Global Collaboration and Beyond: Uncovering Patterns in Scientific Networks,” ARL-SR-0493 (FEB 2024), 1–213.
  7. Hoppel, C., Stepp, D., Becker, R., Bakas, M., Vargas–Gonzalez, L., Tonge, A., Tschopp, M.A., “Controlling the Load Distribution in High-Strength Materials Army Science Planning and Strategy Meeting (ASPSM),” ARL-SR-0438 (Feb 2021), 1–44.
  8. Tschopp, M.A., Joshi, K., Chowdhury, S., “Coupling Molecular Dynamics and Machine Learning for Predicting Aluminum Segregation to Magnesium Grain Boundaries,” ARL-TR-8490 (Sep 2018), 1–40.
  9. Guziewski, M., Coleman, S.P., Tschopp, M.A., “Expansion and Automation of the Energy Conserving Orientational Force for Calculation of Grain Boundary Mobility,” ARL-TR-8302 (Feb 2018), 1–42.
  10. Khanzadeh, M., Chowdhury, S., Marufuzzaman, M., Tschopp, M.A., Bian, L., “Using Self Organizing Maps for In-situ Monitoring of Melt Pool Thermal Profiles for Porosity Prediction in Laser-based Additive Manufacturing Processes,” ARL-TN-0888 (June 2018), 1–31.
  11. Tschopp, M.A., Hernandez, E., “Quantifying Similarity and Distance Measures for Vector-based Datasets: Histograms, Signals, and Probability Distribution Functions,” ARL-TN-0810, 1–40.
  12. Tschopp, M.A., Nouranian, S., Baskes, M.I., Gwaltney, S.R., Horstemeyer, M.F., “Influence of Parameters of a Reactive Interatomic Potential on the Properties of Saturated Hydrocarbons,” ARL-TR-7850, 1–62.
  13. Foley, D., Coleman, S.P., Tucker, G.J., Tschopp, M.A., “Voronoi-based Nanocrystalline Generation Algorithm for Atomistic Simulations,” ARL-TN-0806, 1–44.
  14. Tschopp, M.A., “3-D Synthetic Microstructure Generation with Ellipsoid Particles,” ARL-TN-0789, 1–32.
  15. Foley, D., Tschopp, M.A., Coleman, S.P., “Nanocrystal Generation through Geometric Packing Algorithms,” HIP-15-20 final report.
  16. Tschopp, M.A., Maupin, H.E., “ARL Lightweight and Specialty Metals Branch Research and Development (FY14),” ARL-SR-0319, 1–64.
  17. Tschopp, M.A., Darling, K.A., Atwater, M.A., Kecskes, L.J., “Low-Cost Structural Thermoelectric Materials: Processing and Consolidation,” ARL-TR-7167, 1–28.
  18. Tschopp, M.A., Darling, K.A., Atwater, M.A., “Surpassing the Theoretical Limit of Porosity in Conventional Solid-State Foaming: Microstructure Characterization of Length Scales in a Copper Metal Foam,” ARL-TR-7139, 1–60.
  19. Tschopp, M.A., Darling, K.A., Atwater, M.A., Solanki, K.N., “Predicting Grain Growth in Nanocrystalline Materials: A Thermodynamic and Kinetic-Based Model Informed by High Temperature X-ray Diffraction Experiments,” ARL-TR-7107, 1–79.
  20. Tschopp, M.A., “Atomistic Modeling Development for Nanocrystalline Metal Alloys,” PETTT Final Technical Report, High Performance Computing Modernization Program, 2014.
  21. Tschopp, M.A., Darling, K.A., Atwater, M.A., VanLeeuwen, B.K., Liu, Z.K., “Enhancing the High Temperature Capability of Nanocrystalline Alloys: Utilizing Thermodynamic Stability Maps to Mitigate Grain Growth Through Solute Selection,” ARL-TR-6743, 1–53.
  22. Tschopp, M.A., Darling, K.A., “Towards Predictive Models of Nanocrystalline Binary Metal Alloys: Role of Solutes and Interfaces on Segregation and Mechanics in Al-Based Nanocrystalline Systems (ISN Year 1 Report),” ARL-SR-291.
  23. Tschopp, M.A., F. Gao, X. Sun,“Modeling of defect sinks at grain boundaries in Fe-Cr and Fe-He systems,” U.S. Department of Energy, Nuclear Energy Advanced Modeling and Simulation, Fundamental Methods and Models Program, 2012 Quarterly Report.
  24. Tschopp, M.A., F. Gao, X. Sun,“The Effects of the Uncertainty of Thermodynamic and Kinetic Properties on Nucleation and Evolution Kinetics of Cr-Rich Phase in Fe-Cr Alloys,” U.S. Department of Energy, Nuclear Energy Advanced Modeling and Simulation Program, M3MS-12PN0606018, ARL-CR-0705, 1–52.
  25. Tschopp, M.A., “Damage Mechanics Model Development for Monocrystalline Superalloys,” Defense Technical Information Center, ADA523928.
  26. Fairchild, S., Tschopp, M.A., Bartha, B.B., Murray, P.T., Porter, W.J., “ http://www.dtic.mil/docs/citations/ADA502792Digital Image Correlation of Ni-base Superalloy René 88DT Using In Situ SEM Tension Experiments,” Preprint, Defense Technical Information Center, ADA502792.
  27. Tschopp, M.A., Tiley, J.S., Viswanathan, G.B., “Automated Identification and Characterization of Secondary & Tertiary gamma' Precipitates in Nickel-Based Superalloys,” Preprint, Defense Technical Information Center, ADA522026.
  28. Tschopp, M.A., Groeber, M.A., Simmons, J.P.,Rosenberger, A.H., Woodward, C., “Technique for Automated Extraction of Symmetric Microstructural Features: Application to Dendritic Cores in Single Crystal Ni-Based Superalloys,” Preprint, Defense Technical Information Center, ADA546146.
  29. Spowart, J.E., Wilks, G.B., Tschopp, M.A., “Multi-Scale Characterization of Inhomogeneous Morphologically Textured Microstructures,” Preprint, Defense Technical Information Center, ADA501812.
  30. Tschopp, M.A., Wilks, G.B., Spowart, J.E., “Multi-Scale Characterization of Orthotropic Microstructures,” Preprint, Defense Technical Information Center, ADA489997.
  31. Tschopp, M.A., Wilks, G.B., Spowart, J.E., “Multiscale Characterization Technique for Chemically Reactive Multiphase Composite Microstructure,” Preprint, Defense Technical Information Center, ADA523465.
  32. Groeber, M.A., Simmons, J., Rosenberger, A.H., Woodward, C., Tschopp, M.A., Fahringer, R., “Symmetry-Based Automated Extraction of Microstructural Features: Application to Dendritic Cores in Single-Crystal Ni-Based Superalloys,” Preprint, Defense Technical Information Center, ADA520551.
  33. Bartha, B.B., John, R., Caton, M., Jha, S., Porter, W.J., Fairchild, S., Murray, T., Tschopp, M.A., Li, K., Larsen, J.M., Szczepanski, C.J., Glavicic, M.G., Martin, P., “Modeling Complex Structural Geometry and Process Interaction,” Defense Technical Information Center, ADA522042.
  34. Tiley, J.S., Viswanathan, G.B., Shiveley, A., Tschopp, M.A., Srinivasan, R., Fraser, H.L., Banerjee, R., “Measurement of gamma prime Precipitates in a Nickel-Based Superalloy using Energy-Filtered Transmission Electron Microscopy Coupled With Automated Segmenting Techniques,” Preprint, Defense Technical Information Center, ADA519441.